Visitor Access Options Available
PRE-WIRE OPTION $45
Selecting this option will reduce your setup time by up to 40% with easy to follow example wires which we also power up and test before leaving the work shop. Have peace of mind that the system is wired correctly, tested and ready to be installed.
The actuator arm and gate stop (if using from the kit) must be mounted on the same level to prevent any bending or twisting of the gate.
The E8 single gate opener is a great option for automating your farm gate but it will also provide an additional layer of safety and security for family, pets and livestock. The single gate opener is versatile and will suit gates swinging inward or outward of the property.
Our single farm gate opener is easy to install and comes with full DIY instructions and phone support if required. Adding this farm gate opener to your property will allow ease of opening and closing of your farm gate but with extra security and peace of mind.
Knowing the dimensions and the approximate weight of the gate, the sturdiness of the post and the material the gate is made out of, is necessary in order to choose the correct automatic farm gate opener for your requirement.
Both solar and low voltage electric options are available in these kits. The solar kit is the perfect solution if you don't have 240v power around your gate way area but still require an automatic gate opener on your farm gate.
Now if its electric you're looking for, then there is no need for mains (240V) power right at the gate site as the electric kit includes a 16V power supply and can be placed up to 50mtrs away from your farm gate. This power supply plugs into your 240v outlet which you then run low voltage cable from and directly into the gate opener control box.
Running low Voltage wire is safe and can be even stapled along the fence line or run through conduit 100mm under the ground. Unlike 600mm under ground for 240V supply to your front gate.
24/302 South Pine Road Brendale, QLD, 4500
07 3205 3002
Mon-Fri: 8.30am - 5pm